Description: 

 High-speed fiber filter media, performance is better than fiber ball filter, filtration rate, high (20-50M / h) interception effect, is a new filter media.. 

 Material: 

 This product is made of high quality acrylic, polypropylene, polyester fiber as raw materials. 

 Features: 

 Because of its use of its surface contaminated with a large number of biological groups and oxygenation, repeated contact with the water, so difficult to remove the small precipitate the rejection of suspended solids and organic matter degradation to achieve the purpose of purification. Quartz sand filter ratio 4-4.5 times higher. Easy to back wash can be automated management, general filtration rate 35m / h, coarse filter water 120mg / L, effluent SS ≤ 5mg / L, fine filter water 25mg / L, water ≤ 2mg / L, due to its special technology , can be hired to replace and repair faster. 

 Uses: 

 Widely used in electricity, oil, chemical, metallurgy, electronics and other industries with high standards of water use, recycling, next to the filter, and wastewater recycling. Fiber filter media for direct filtration, the water quality is good, filter layer resistance, the work cycle is long, similar to reverse osmosis for desalination and other water quality requirements more stringent pretreatment. 

 Scope: 

 Used for drinking water treatment (water, drinking water, purified water, high water) of industrial water treatment (power, chemical, printing and dyeing, electroplating and other industries highly efficient filters) circulating water (swimming pool water treatment, aquarium water cycle, water park, man-made landscape , fresh water aquaculture) cooling water treatment (industrial cooling water, cooling water, add water cooling system, cooling system next to the water treatment purification) sewage treatment (sewage or industrial waste water physicochemical / biological treatment effluent directly) Water Treatment (Miscellaneous water reuse, hotels in the water treatment, water treatment residential area) 

 Advantages: 

 High fiber, light texture, high strength, good elasticity, abrasion resistance, corrosion resistance, non-absorbent. 

 Technical parameters: 

 1: Material: fiber bundles with polymer modified fiber materials. Chemical stability, water treatment process of dissolution no harmful ingredients, no significant accumulation of, and no mutagenicity, fiber diameter wire 2.5dtex, 18dtex. 

 2: The effective length of fiber: filter design according to size. 3, the work environment 1) water pressure 0.2Mpa; 2) filtration rate 60 ~ 80m / h; 3: backwash water intensity ≥ 6L / m · s; 

 4: Anti-flushing gas intensity ≥ 50L / m · S; 

 5: backwash water pressure 0.1 ~ O.15Mpa; 

 6; backwash air pressure /> o.05Mpa; 

 7: Maximum working pressure 0.4Mpa; 

 8: temperature O ~ 50 ℃; 9: Anti-washing time of 25 to 35 minutes; 10: The head loss at end of period generally 0.05Mpa, not more than 0.1M pa;